botny high temperature resistant aeosol paint-pg电子竞技平台

the product is organic silicon,air drying in normal temperature,   convenient to use ,well atomization, fine films.
surface dry in 30min, the top-effect is 2hrs later after drying in 200℃.
the paint can keep good efficiency under 300℃,silver paint can achieve 400℃.
multi to use on stack, pipe,vihicle& motorcyce engine,exhausting and other high temperature environment.

specification：400ml×12
code：b-1089
shelf life：3 years
executive srandard：q/gzbcl 24

shake well before use, ensure area to be treated is free from wax, oil , grease ,etc.
for compatibility,test on a similar surfact, spray using a back and forth action at a distance of 25-30cm.
thinly applied coats built up at 15minute intervals will achieve best results.
leave for 24 hrs to harden.
after use invert can and spray to clear nozzle or remove the nozzle to clear with a pin.

keep out of reach of  chirdlren.
keep the can upright , the included angle is less than 45 degree.
use only in well ventilated areas.
in case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
if swallowed,throw up immediately and ask doctor first-aid.
do not expose to temperatures exceeding 45℃.
do not put the product in the car, keep away form sources of ignition, exposure ,pierce and burn.
it is normal phenomenon the weight will be changed as time different.
it is wastagerate is 2%/year